A keyboard is a typewriter-style device, which uses an arrangement of buttons or keys, to act as mechanical levers or electronic switches. In some cases whereby a Dell computer keyboard key is no more functioning and its due for replacement. Thus, a new pc keyboard of the same model of the spoiled one has to be replace with a brand new one.
Below are the
proper steps i used when replacing a new PC keyboard
1.
STEP
1. The keyboard
secured on the top with three spring loaded latches. Push on each latch with a
small screwdriver and at the same time lift up the keyboard a little bid so the
latch stays in open position.
2.
STEP
2. After all
latches are released you can lift up the top side as it shown on the following
picture. Be careful, it’s still connected to the motherboard.
3.
STEP
3. Move the
keyboard towards the LCD screen and access the connector. the connector has to
be unlocked.
4.
STEP
4. You unlock the
connector by moving the brown piece about 2 millimeters towards the display.
The brown piece must stay attached to the white base. On the following picture
the connector shown in the unlocked position. Now you can pull the cable from
the connector.
5. STEP 5. Finally, remove the failed
keyboard from the laptop and replace it with a new one by connecting t he plug-in
to the motherboard
0 comments:
Post a Comment